PT. Tropik Energi Pandan is a PSC operator in South Sumatera currently going into production phase that will produce oil & gas. We invite the best talent in the industry to join our dynamic team to fill the following position :
1. Drilling Superintendent (DS)
2. Production Engineer (PE)
3. Logistics Supervisor (LS)
4. Electrical Engineer (EE)
5. Civil Engineer (CE)
6. Senior Drilling Engineer (DE)
7. Mechanical Engineer (ME)
8. Legal Officer (LO)
9. Drafter (D)
Special Requirement :
- Bachelor degree in Petroleum or related technical engineering from reputable university
- Bachelor of Law (8) from reputable university
- Minimum Diploma degree for drafter and able operate AUTOCAD software (9)
- Maximum of age 40 years old
- Minimum 7 years experience in oil & gas industry
- Has good knowledge in operational excellence in oil & gas industry
- Understand current regulation for oil & gas
General Requirement :
- Good interpersonal skill, self motivated and communication skill
- Able to work in a team player or as an individual
- Performance oriented
If you meet the above qualifications, please send your application with detailed resume, recent photograph and put the position in the email subject to :
HR & GA Department
PT. Tropik Energi Pandan
tephrd@gmail.com
Open Position for Drafter Piping
We are immediately looking for: Piping Drafter
Requirements:
· Male/Female Maximum 25 years old
· Minimum 2 years experiences in Piping Drafter (isometric, piping general arrangement and equipment lay-out)
· Minimum Senior High School
· Having good communication, Hard Worker, Honest, discipline, responsible, initiative, can working with a team or independently & ready to work hard with certain pressure
Please submit your Application, latest CV, Certificates and send to: sudarta_bisnis11@yahoo.com
Requirements:
· Male/Female Maximum 25 years old
· Minimum 2 years experiences in Piping Drafter (isometric, piping general arrangement and equipment lay-out)
· Minimum Senior High School
· Having good communication, Hard Worker, Honest, discipline, responsible, initiative, can working with a team or independently & ready to work hard with certain pressure
Please submit your Application, latest CV, Certificates and send to: sudarta_bisnis11@yahoo.com
Piping Drafter Jakarta Raya - Jakarta Selatan
Kami adalah group perusahaan swasta nasional yang berkembang pesat dan bergerak di bidang konstruksi. Kami memberi kesempatan bagi tenaga profesional dan kompeten di bidangnya untuk bergabung dan mengisi posisi sebagai :
Piping Drafter
Jakarta Raya - Jakarta Selatan
Requirements:
Pria maksimal 30 tahun
Pendidikan minimal STM Bangunan
Pengalaman kerja minimal 1 tahun
Mempunyai keterampilan Auto CAD, Structure dan ME
Dapat bekerja di bawah tekanan dan pekerja keras
Kepribadian baik dan jujur
Dapat bekerjasama dengan tim
Penempatan untuk di Site Dumai-Pekanbaru
Kunjungi website kami di :
WWW.SIGMAMUTIARA.COM
Kirimkan lamaran lengkap ke :
Email: hrd@sigmamutiara.com
atau
PO BOX 6027 JKS GN JKS 12120
SENIOR DRAFTER - CIVIL AND STRUCTURAL
PT. AMEC Berca Indonesia (ABI) is a multi-national company providing engineering & asset support services to the Indonesian oil and gas industry. ABI plans to expand to other market segments and develop into EPC Company. Now, the company is seeking high qualified candidates to strengthen our team.
URGENTLY REQUIRED
1. SUBJECT MATTER EXPERT (SME) – Operations and Maintenance
Responsibilities:
Working with a technical writer to develop content for operating and maintenance procedures; using your process knowledge and site-specific engineering information.
Reporting project progress to the Project Manager.
Contacting client and vendor representatives to obtain and clarify technical information; working remotely and during on-site visits.
Working within a team environment, using strong interpersonal skills while enabling seamless interaction with internal departments and client representatives.
Generating requests for information for client and vendor representatives.
Following and maintaining project standards.
Potentially leading and supporting a team of in-country technical writers.
Qualifications:
· Degree or Diploma in Chemistry, Chemical Engineering, Mechanical Engineering.
· A minimum of ten (10) years operating experience in the oil and gas industry.
· Technical writing experience and/or equivalent process industry training experience is preferred.
· Excellent English reading and writing skills are essential; additional languages considered an asset.
· Ability to comprehend P&ID’s, vendor information, and process control descriptions.
· A strong proficiency in MS Word is required.
· Must be able to relocate to Jakarta or work on a rotational basis.
· Must be able to travel and have a willingness to work on occasion in various field locations.
2. ENGINEERING SUPERINTENDENT
Responsibilities
• Lead and control all Contractors’ Off-site Engineering activities during Contract period.
• Establish and maintain good alignment among engineering disciplines, 3D modeling team, project controls and document control to meet Company’s expectation during performance of Services. This shall include but not limited to: internal squad check system to ensure quality of deliverable prior to submission to Company, work completion on budget & schedule, proper engineering document & data management, etc.
• Work closely with Company during execution of Off-site Engineering Services, which shall include but not limited to: facilitating work proposal review process to achieve mutual agreement in timely manner, resolving related problems in timely manner, execution of regular lessons learned session to document best practices & improvement opportunities, etc.
• Ensure all systems, processes and procedures for execution of Off-site Engineering Services are consistently and well implemented to meet Company’s expectation during Contract period.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge related to the performance of Engineering Services.
• Execute continuous mentoring program from senior to junior personnel during performance of Off-site Engineering Services, including tracking of its effectiveness and documenting the results.
• Report to and assist Manager Engineering for executing Off-site Engineering Services during the Contract period.
Qualifications:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in various engineering works (including 3D modeling) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at supervisory position. Furthermore, several years of which shall cover following aspects:
• Minimum experience as Engineering Superintendent or Engineering Coordinator for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• The candidate shall have broad knowledge on various engineering aspects, such as: engineering multi-disciplines, 3D modeling implementation & software, engineering quality management, engineering execution management, internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
3. LEAD PROCESS ENGINEER
Responsibilites :
· Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
• Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary
· Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company
· Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services
Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
• Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
• Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
• He candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
4. PROCESS ENGINEER
Responsibilities
• Prepare and complete development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably Chemical Engineering.
• The candidate shall have minimum 3 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on process engineering discipline and capable to utilize related baseline software and codes/standards.
• Able to join immediately.
5. LEAD ENGINEER CIVIL AND STRUCTURAL
Responsibilities
• Lead and supervise Contractor’s activities in development of deliverables in respective engineering discipline (e.g. piping, mechanical, instrument & control, electrical, civil & structural) during Contract period.
• Serve as SME (subject matter expert) in respective engineering discipline during Contract period, including utilizing Contractor’s corporate internal and/or external professional networking as necessary.
• Implement Contractor’s QA/QC plan including internal squad check process for deliverables of the respective engineering discipline, prior to submission to Company.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on related engineering discipline during performance of Engineering Services.
• Report to and assist Superintendent Engineering for execution of Off-site Engineering Services during the Contract period.
Qualifications: • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in related engineering discipline works (including 3D modeling related aspects) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at senior and lead position. Furthermore, several years of which shall cover following aspects.
• Minimum experience as Lead Design Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of related engineering discipline personnel from various levels with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the respective engineering discipline and broad knowledge on various aspects, such as: related engineering internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
6. DESIGN ENGINEER (CIVIL AND STRUCTURAL )
Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
Qualification of Personnel • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
• Eligible for Indonesia citizen, only.
7. ELECTRICAL DESIGNER
Responsibilities
• Perform activities in the development of 3D engineering and drafting related to electrical discipline including activities planning and scheduling, at Contractor’s Off-site Engineering Office.
• Report to and assist Coordinator – 3D modeling related to execution of Off-site Engineering with 3D modeling basis.
Qualifications
• Minimum education is to possess engineering degree (S1) with minimum 5 years working experience or engineering diploma degree (D3) with minimum 8 years’ experience, both in providing project engineering services with 3D modeling basis.
• Minimum 3 years of which (with S1 degree) or 5 years of which (with D3 degree), working for project engineering with 3D modeling basis for oil and gas or petrochemical handling facilities
• The candidate shall have broad knowledge of electrical engineering discipline, and be fully conversant with 3D modeling baseline software (PDMS and Naviswork Review).
• Eligible for Indonesia citizen, only
8. SENIOR DRAFTER - CIVIL AND STRUCTURAL
Responsibilities • Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.
Qualifications
• Minimum education is to possess an engineering diploma degree (D3) with 4 years working experience or senior high school graduate (SMU) with 8 years working experience, both in design drafting by using CADD.
• Minimum 3 years of which (with D3 degree) or 6 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Micro station version 8i.
9. SENIOR DESIGN ENGINEER INSTRUMENTATION
Responsibilities:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Qualifications
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API 610, API 676, ASME-VIII Division 1/2, API 650, etc.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
• The candidate shall have high mentoring & coaching skills.
10. COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2) Prepare individual project Total Installed Cost (TIC) estimates at or above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
3) Work closely with Company and Companys contractors during performance of cost estimating & control services for Companys projects
4) Develop and maintain Contractors processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.)
Requirements
1) The candidate shall have minimum 8 years working experience in cost estimating & control, with minimum 4 years of which are for oil & gas or petrochemical handling projects and/or facilities
2) The candidate shall have thorough knowledge on various cost estimating & control practices and related codes & standards, including associated software.
3) The candidate shall have thorough knowledge of local productivities, customs and labor practices and applicable local labor laws to the degree these have a material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately
DRAFTER SENIOR
Responsibilities:
• Lead and control Contractors activities in the development of design drafting and the operation of Contractors drafting shops at Minas and Duri in Companys Area of operation
• Work closely with Company for overall execution of On-site Drafting Services, including for resources planning, prioritization and leveling.
• Develop and maintain drawing specifications, numbering and filing system.
• Ensure that all processes and procedures in Contractors drafting execution and drafting QA/QC plan, are consistently and well implemented during Contract period.
· Implement and monitor Contractors key performance indicators related to On-site Drafting Services.
· Execute continuous mentoring program from senior to junior personnel in Contractors drafting shops during the performance of Services including tracking of its effectiveness and documenting the results.
· Report to and assist Manager Engineering in executing On-site Drafting Services.
Qualifications
• Minimum education is to possess an engineering degree (S1) with 10 years working experience or engineering diploma degree (D3) with 15 years working experience, both in engineering design and drafting.
• Minimum 8 years of which (with S1 degree) or 12 years of which (with D3 degree), working in oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be fluent with all design codes and standards relevant to each discipline (process, mechanical & piping, electrical, instrument & control, civil & structural) which are relevant to the oil and gas industry.
• The candidate shall be proficient with CADD baseline software: Intergraph Microstation version 8i, and familiar with 3D modeling baseline software: PDMS and Naviswork Review.
Please submit a comprehensive Resume (word format) with name of position in “subject” not later than 20 September 2013
human.resources@amec-berca.co.id
(Only short-listed candidates will be contacted for further processes)
URGENTLY REQUIRED
1. SUBJECT MATTER EXPERT (SME) – Operations and Maintenance
Responsibilities:
Working with a technical writer to develop content for operating and maintenance procedures; using your process knowledge and site-specific engineering information.
Reporting project progress to the Project Manager.
Contacting client and vendor representatives to obtain and clarify technical information; working remotely and during on-site visits.
Working within a team environment, using strong interpersonal skills while enabling seamless interaction with internal departments and client representatives.
Generating requests for information for client and vendor representatives.
Following and maintaining project standards.
Potentially leading and supporting a team of in-country technical writers.
Qualifications:
· Degree or Diploma in Chemistry, Chemical Engineering, Mechanical Engineering.
· A minimum of ten (10) years operating experience in the oil and gas industry.
· Technical writing experience and/or equivalent process industry training experience is preferred.
· Excellent English reading and writing skills are essential; additional languages considered an asset.
· Ability to comprehend P&ID’s, vendor information, and process control descriptions.
· A strong proficiency in MS Word is required.
· Must be able to relocate to Jakarta or work on a rotational basis.
· Must be able to travel and have a willingness to work on occasion in various field locations.
2. ENGINEERING SUPERINTENDENT
Responsibilities
• Lead and control all Contractors’ Off-site Engineering activities during Contract period.
• Establish and maintain good alignment among engineering disciplines, 3D modeling team, project controls and document control to meet Company’s expectation during performance of Services. This shall include but not limited to: internal squad check system to ensure quality of deliverable prior to submission to Company, work completion on budget & schedule, proper engineering document & data management, etc.
• Work closely with Company during execution of Off-site Engineering Services, which shall include but not limited to: facilitating work proposal review process to achieve mutual agreement in timely manner, resolving related problems in timely manner, execution of regular lessons learned session to document best practices & improvement opportunities, etc.
• Ensure all systems, processes and procedures for execution of Off-site Engineering Services are consistently and well implemented to meet Company’s expectation during Contract period.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge related to the performance of Engineering Services.
• Execute continuous mentoring program from senior to junior personnel during performance of Off-site Engineering Services, including tracking of its effectiveness and documenting the results.
• Report to and assist Manager Engineering for executing Off-site Engineering Services during the Contract period.
Qualifications:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in various engineering works (including 3D modeling) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at supervisory position. Furthermore, several years of which shall cover following aspects:
• Minimum experience as Engineering Superintendent or Engineering Coordinator for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• The candidate shall have broad knowledge on various engineering aspects, such as: engineering multi-disciplines, 3D modeling implementation & software, engineering quality management, engineering execution management, internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
3. LEAD PROCESS ENGINEER
Responsibilites :
· Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
• Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary
· Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company
· Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services
Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
• Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
• Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
• He candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
4. PROCESS ENGINEER
Responsibilities
• Prepare and complete development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent, preferably Chemical Engineering.
• The candidate shall have minimum 3 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on process engineering discipline and capable to utilize related baseline software and codes/standards.
• Able to join immediately.
5. LEAD ENGINEER CIVIL AND STRUCTURAL
Responsibilities
• Lead and supervise Contractor’s activities in development of deliverables in respective engineering discipline (e.g. piping, mechanical, instrument & control, electrical, civil & structural) during Contract period.
• Serve as SME (subject matter expert) in respective engineering discipline during Contract period, including utilizing Contractor’s corporate internal and/or external professional networking as necessary.
• Implement Contractor’s QA/QC plan including internal squad check process for deliverables of the respective engineering discipline, prior to submission to Company.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on related engineering discipline during performance of Engineering Services.
• Report to and assist Superintendent Engineering for execution of Off-site Engineering Services during the Contract period.
Qualifications: • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in related engineering discipline works (including 3D modeling related aspects) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at senior and lead position. Furthermore, several years of which shall cover following aspects.
• Minimum experience as Lead Design Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of related engineering discipline personnel from various levels with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the respective engineering discipline and broad knowledge on various aspects, such as: related engineering internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
6. DESIGN ENGINEER (CIVIL AND STRUCTURAL )
Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
Qualification of Personnel • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
• Eligible for Indonesia citizen, only.
7. ELECTRICAL DESIGNER
Responsibilities
• Perform activities in the development of 3D engineering and drafting related to electrical discipline including activities planning and scheduling, at Contractor’s Off-site Engineering Office.
• Report to and assist Coordinator – 3D modeling related to execution of Off-site Engineering with 3D modeling basis.
Qualifications
• Minimum education is to possess engineering degree (S1) with minimum 5 years working experience or engineering diploma degree (D3) with minimum 8 years’ experience, both in providing project engineering services with 3D modeling basis.
• Minimum 3 years of which (with S1 degree) or 5 years of which (with D3 degree), working for project engineering with 3D modeling basis for oil and gas or petrochemical handling facilities
• The candidate shall have broad knowledge of electrical engineering discipline, and be fully conversant with 3D modeling baseline software (PDMS and Naviswork Review).
• Eligible for Indonesia citizen, only
8. SENIOR DRAFTER - CIVIL AND STRUCTURAL
Responsibilities • Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.
Qualifications
• Minimum education is to possess an engineering diploma degree (D3) with 4 years working experience or senior high school graduate (SMU) with 8 years working experience, both in design drafting by using CADD.
• Minimum 3 years of which (with D3 degree) or 6 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Micro station version 8i.
9. SENIOR DESIGN ENGINEER INSTRUMENTATION
Responsibilities:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Qualifications
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API 610, API 676, ASME-VIII Division 1/2, API 650, etc.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
• The candidate shall have high mentoring & coaching skills.
10. COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2) Prepare individual project Total Installed Cost (TIC) estimates at or above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
3) Work closely with Company and Companys contractors during performance of cost estimating & control services for Companys projects
4) Develop and maintain Contractors processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.)
Requirements
1) The candidate shall have minimum 8 years working experience in cost estimating & control, with minimum 4 years of which are for oil & gas or petrochemical handling projects and/or facilities
2) The candidate shall have thorough knowledge on various cost estimating & control practices and related codes & standards, including associated software.
3) The candidate shall have thorough knowledge of local productivities, customs and labor practices and applicable local labor laws to the degree these have a material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately
DRAFTER SENIOR
Responsibilities:
• Lead and control Contractors activities in the development of design drafting and the operation of Contractors drafting shops at Minas and Duri in Companys Area of operation
• Work closely with Company for overall execution of On-site Drafting Services, including for resources planning, prioritization and leveling.
• Develop and maintain drawing specifications, numbering and filing system.
• Ensure that all processes and procedures in Contractors drafting execution and drafting QA/QC plan, are consistently and well implemented during Contract period.
· Implement and monitor Contractors key performance indicators related to On-site Drafting Services.
· Execute continuous mentoring program from senior to junior personnel in Contractors drafting shops during the performance of Services including tracking of its effectiveness and documenting the results.
· Report to and assist Manager Engineering in executing On-site Drafting Services.
Qualifications
• Minimum education is to possess an engineering degree (S1) with 10 years working experience or engineering diploma degree (D3) with 15 years working experience, both in engineering design and drafting.
• Minimum 8 years of which (with S1 degree) or 12 years of which (with D3 degree), working in oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be fluent with all design codes and standards relevant to each discipline (process, mechanical & piping, electrical, instrument & control, civil & structural) which are relevant to the oil and gas industry.
• The candidate shall be proficient with CADD baseline software: Intergraph Microstation version 8i, and familiar with 3D modeling baseline software: PDMS and Naviswork Review.
Please submit a comprehensive Resume (word format) with name of position in “subject” not later than 20 September 2013
human.resources@amec-berca.co.id
(Only short-listed candidates will be contacted for further processes)
Mechanical & Piping Drafter Jakarta Raya
PT Kimia Yasa (Surabaya)
As growing company in Gas and Petrochemical Industry, we are seeking for professionals as :
Mechanical & Piping Drafter
Jakarta Raya
Requirements:
S1 or D3 in Mechanical or Industrial Engineering.
The Drafter is responsible for providing technical drawings detail the layout of piping and equipment in Oil and Gas processing facility.
These plan are generally done with computer assisted drafting (CAD) programs.
The drafter’s plans must comply with government standards and safety codes as well as client specifications and budget.
Drafting Mechanical and Piping including :
Piping isometrics and Material take off (MTO).
Isometric drawing by AUTO CAD.
Piping Instrument Diagram (P&ID).
Prepare site plan Design drawing.
Prepare Shop drawing include Material take off (MTO).
Prepare Cutting Instruction Drawing.
Prepare weld map and NDE plan.
Having ability in calculating project budget.
Send your application Letter an CV to :
suryatin.hidayat@kimiayasa.com
As growing company in Gas and Petrochemical Industry, we are seeking for professionals as :
Mechanical & Piping Drafter
Jakarta Raya
Requirements:
S1 or D3 in Mechanical or Industrial Engineering.
The Drafter is responsible for providing technical drawings detail the layout of piping and equipment in Oil and Gas processing facility.
These plan are generally done with computer assisted drafting (CAD) programs.
The drafter’s plans must comply with government standards and safety codes as well as client specifications and budget.
Drafting Mechanical and Piping including :
Piping isometrics and Material take off (MTO).
Isometric drawing by AUTO CAD.
Piping Instrument Diagram (P&ID).
Prepare site plan Design drawing.
Prepare Shop drawing include Material take off (MTO).
Prepare Cutting Instruction Drawing.
Prepare weld map and NDE plan.
Having ability in calculating project budget.
Send your application Letter an CV to :
suryatin.hidayat@kimiayasa.com
Piping Designer
Our client based in Jakarta needed engineer with 5-10 years in oil & gas for RW JO ECM Project.Project duration still remains 4 years from today. Please put your last salary in your resume
- Planners/ Schedulers
- Project Controllers
- Document Controllers
- Project Estimator
- Lead Civil Engineer
- Sr. Civil Engineer
- Civil Designer
- Civil Drafter
- Piping Engineer
- Piping Designer
Please send your resume 1 week after this advertisement to: mps.recare@yahoo.com
- Planners/ Schedulers
- Project Controllers
- Document Controllers
- Project Estimator
- Lead Civil Engineer
- Sr. Civil Engineer
- Civil Designer
- Civil Drafter
- Piping Engineer
- Piping Designer
Please send your resume 1 week after this advertisement to: mps.recare@yahoo.com
Drafter Kalimantan Timur - Berau
PT. Mutiara Tanjung Lestari
A subsidiary of PT. Berau CoalEnergy Tbk, is well established and modern mining contractor company providing services for the rapid growth mining and related industries in East Kalimantan, require professional with complete dedication and high motivation to fill the position for:
Drafter
Kalimantan Timur - Berau
Responsibilities:
Develop, interpret and execute Life of Mine and other mine planning and scheduling models.
Design, plan, optimize, cost and review the coal mining operations.
Ensure and develop all scheduling plan, Recommend appropriate cut off grades strategies
Ensure daily, weekly, quarterly, annual budgets & forecasts, life of mine plans are prepared and to accepted standards and a timely and cost effective manner
Oversee the complete mining process from development of mine plans to actual delivering product to the plant.
Requirements:
Minimal degree Mining Engineering
Extensive experience with mining related software:
SURPAC with mine scheduling
MINESCAPE
MINE 2.4D with EPS
DATAMINE
Has POP, POM certificate is advantage
In-depth understanding of the mine-planning and scheduling process, especially in open-cast brown fields and green fields projects
Experience in coal mining operational management
Project management skills
Experience in the construction/development of new mining operations)
Willing to be placedin Berau (East Kalimantan)
If you feel that your qualifications meet our requirements; please send your CV in English with one recent photo, code “Drafter” in the subject. Mail it to :
recruitment@mtl.co.id
(cc) recruitment@beraucoalenergy.co.id
A subsidiary of PT. Berau CoalEnergy Tbk, is well established and modern mining contractor company providing services for the rapid growth mining and related industries in East Kalimantan, require professional with complete dedication and high motivation to fill the position for:
Drafter
Kalimantan Timur - Berau
Responsibilities:
Develop, interpret and execute Life of Mine and other mine planning and scheduling models.
Design, plan, optimize, cost and review the coal mining operations.
Ensure and develop all scheduling plan, Recommend appropriate cut off grades strategies
Ensure daily, weekly, quarterly, annual budgets & forecasts, life of mine plans are prepared and to accepted standards and a timely and cost effective manner
Oversee the complete mining process from development of mine plans to actual delivering product to the plant.
Requirements:
Minimal degree Mining Engineering
Extensive experience with mining related software:
SURPAC with mine scheduling
MINESCAPE
MINE 2.4D with EPS
DATAMINE
Has POP, POM certificate is advantage
In-depth understanding of the mine-planning and scheduling process, especially in open-cast brown fields and green fields projects
Experience in coal mining operational management
Project management skills
Experience in the construction/development of new mining operations)
Willing to be placedin Berau (East Kalimantan)
If you feel that your qualifications meet our requirements; please send your CV in English with one recent photo, code “Drafter” in the subject. Mail it to :
recruitment@mtl.co.id
(cc) recruitment@beraucoalenergy.co.id
Drafter Kalimantan Timur - Berau
PT. Mutiara Tanjung Lestari
A subsidiary of PT. Berau CoalEnergy Tbk, is well established and modern mining contractor company providing services for the rapid growth mining and related industries in East Kalimantan, require professional with complete dedication and high motivation to fill the position for:
Drafter
Kalimantan Timur - Berau
Responsibilities:
Develop, interpret and execute Life of Mine and other mine planning and scheduling models.
Design, plan, optimize, cost and review the coal mining operations.
Ensure and develop all scheduling plan, Recommend appropriate cut off grades strategies
Ensure daily, weekly, quarterly, annual budgets & forecasts, life of mine plans are prepared and to accepted standards and a timely and cost effective manner
Oversee the complete mining process from development of mine plans to actual delivering product to the plant.
Requirements:
Minimal degree Mining Engineering
Extensive experience with mining related software:
SURPAC with mine scheduling
MINESCAPE
MINE 2.4D with EPS
DATAMINE
Has POP, POM certificate is advantage
In-depth understanding of the mine-planning and scheduling process, especially in open-cast brown fields and green fields projects
Experience in coal mining operational management
Project management skills
Experience in the construction/development of new mining operations)
Willing to be placedin Berau (East Kalimantan)
If you feel that your qualifications meet our requirements; please send your CV in English with one recent photo, code “Drafter” in the subject. Mail it to :
recruitment@mtl.co.id
(cc) recruitment@beraucoalenergy.co.id
A subsidiary of PT. Berau CoalEnergy Tbk, is well established and modern mining contractor company providing services for the rapid growth mining and related industries in East Kalimantan, require professional with complete dedication and high motivation to fill the position for:
Drafter
Kalimantan Timur - Berau
Responsibilities:
Develop, interpret and execute Life of Mine and other mine planning and scheduling models.
Design, plan, optimize, cost and review the coal mining operations.
Ensure and develop all scheduling plan, Recommend appropriate cut off grades strategies
Ensure daily, weekly, quarterly, annual budgets & forecasts, life of mine plans are prepared and to accepted standards and a timely and cost effective manner
Oversee the complete mining process from development of mine plans to actual delivering product to the plant.
Requirements:
Minimal degree Mining Engineering
Extensive experience with mining related software:
SURPAC with mine scheduling
MINESCAPE
MINE 2.4D with EPS
DATAMINE
Has POP, POM certificate is advantage
In-depth understanding of the mine-planning and scheduling process, especially in open-cast brown fields and green fields projects
Experience in coal mining operational management
Project management skills
Experience in the construction/development of new mining operations)
Willing to be placedin Berau (East Kalimantan)
If you feel that your qualifications meet our requirements; please send your CV in English with one recent photo, code “Drafter” in the subject. Mail it to :
recruitment@mtl.co.id
(cc) recruitment@beraucoalenergy.co.id
Drafter (Draftman) Jakarta Raya
PT SAS International
We are a leading provider in reliable and competitive products, services and solutions in the energy industry which holding ISO 9001:2008 certificate. We are providing project management, engineering, procurement and construction services to our clients in the onshore and offshore oil & gas and petrochemical industries. We are seeking spirited and committed individuals to join us for the position of:
Drafter (Draftman)
Jakarta Raya
Requirements:
Senior High School or Diploma majoring in Engineering (Prefered Mechanical orPiping)
Min. 3 – 5 years experience in the same activity
Familiar with Drafting for Oil & Gas Platform, Piping Installation
Computer literate (PDMS Software)
Able to work under pressure and in a timely manner
Hardworking, fast learner, self-motivated
Strong interpersonal, able to work individually and as a team
Familiar with ISO 9001 & OHSAS 18001
Please send your application letter with detailed resume/CV, stating details of qualifications and summary of experiences, present & expected salary, current photograph (color) and other supporting documents, not later than two weeks after this advertisement to:
Human Resources
Jl. Raya Kebayoran Lama Pal. VII No. 31, Jakarta 12210
Or email hrd@sasinternasional.com
Please state position code on the left side of the envelope or subject email
Only qualified candidate will be notified for further selection
Piping Drafter - Balikpapan Balikpapan (Kalimantan Timur)
PT Technip Indonesia
TECHNIP is a leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical, refinery and mining industries.
Technip has been present in Indonesia for more than 10 years, servicing the Indonesian oil and gas, petrochemical and general Industrial sectors. We are actively involved in offshore and onshore field development, gas processing, refining, mining and other growth market industries.
As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position below:
Piping Drafter - Balikpapan
Balikpapan (Kalimantan Timur)
Responsibilities:
Job purpose:
To deliver the required Piping design work as required by Project and Lead Engineer
Reporting lines and interactions:
Hierarchically reports to: Lead Piping Engineer
Operationally reports to: Engineer / Senior Designer / Lead Engineer
Directly supervises
Main accountabilities
Assist senior/Lead designer in design activities
Check and Ensure the documents prepared are in good quality
Review and check deliverables for completeness and correctness
Requirements:
Diploma or Certificate in Technical Field
At least 5 years experience in oil and gas industry with similar capacity
Familiar with AUTOCAD
Able to operate 3D software to display location/orientation detail
Preferably local hire Balikpapan
Interested candidates are invited to submit their applications online to:
www.technip.com/via e-mail to
hrd.indo@technip.com
Piping Drafter Jakarta Raya
PT Southern Chemicals & Engineering
Are you looking for a chance to develop and grow? If yes then PT. Southern Chemicals & Engg. is giving you the same opportunity.
We have been in Water Treatment industry for 3 decades, now we are currently in a very rapid growth period and are looking for qualified professionals to join with our team as :
Drafter
Jakarta Raya
Requirements:
Technical High School or D3 from Mechanical or Electrical Engineering
Having experience as drafter for 3 years
Familiar with relevant codes used in oil & gas, petrochemicals, power plant
Able to use AutoCAD, PDMS is an advantages
Experience in making Fabrication Drawing Detail, Piping, Layout, P&ID
Please send your application, CV and recent photograph to :
customerservice@southchem-group.com
or to :
PT. SOUTHERN CHEMICALS & ENGINEERING
Komp. Plaza Pasifik B2 No. 28
Kepala Gading, Jakarta Utara 14250
MECHANICAL ENGINEER- PIPELINE
A local company of JFE ENGINEERING CO., a leading engineering company in JAPAN has a keen need of the following personnel to fill up the vacancy for its expanding operation. Its main business fields are covering Environment, Energy, and Machinery and related to above mentioned industries.
Its hiring policy is long term such as lifetime employment. Provide training and travel to Japan after regularization.
Its hiring policy is long term such as lifetime employment. Provide training and travel to Japan after regularization.
MECHANICAL ENGINEER- PIPELINE (code: JFE-PL1)
National Capital Reg - Ortigas Center, Pasig City
Responsibilities: National Capital Reg - Ortigas Center, Pasig City
- The scope of work shall cover design drawing and analysis of Pipeline in energy related projects. The chosen candidates will gain knowledge in AutoCAD and Analysis software as well as planning, estimation and design works.
Requirements:
- Not more than 26 years old.
- Required language(s): English, Filipino
- Must be a graduate of Bachelor of Science in Mechanical Engineering and must be a PRC registered engineer.
- Must have knowledge in the operation of AutoCAD 2D / 3D and Microsoft Office.
- Must have interest in pipeline work and piping work related to energy and water facility industries.
- Fresh graduates with high scholastic records are welcome to apply.
- Knowledge in pipeline is an advantage.
- Willing and interested to work with Japanese Staff and to work in Japan.
- Must study hard and learn Japanese Language to have better communication with Japanese Staff.Knowledge in FEM (Finite Element Method) Analysis is an advantage.
Final Interview Schedule will be from February 13-20, 2013.
Qualified candidates may either apply online or thru email: armie-agocoy@tm.jfe-eng.co.jp
Walk-in applicants are welcome to apply.
Piping Designer (CADWorx) West
 |
|
Piping Draftsman/ Designer Central
 |
The Blue Barrel Pte. Ltd.
Search / Recruitment Firm |
|
PIPING / MECHANICAL DESIGNER National Capital Reg - Makati City
Company Confidential
|
|
Draughtsman Terengganu - Kemaman
Eastern Pacific Industrial Corporation Berhad (EPIC Berhad)
|
|
Piping Drafter,PT Taiyo Sinar Raya Teknik
| |||
|
Subscribe to:
Posts (Atom)